Filter
Top Products
Caller ID System Operation
21
TELEPHONE Function
KEYPAD
0 MSG Waiting Delete: Clears current message waiting indication.
* Area Code: This unit does not require any programming of an Area
Code. However, this option could be used to add the local Area Code
to numbers that were stored as 7-digits in the phone book and 10-
digit dialing is required in the local calling area.
NOTE: At any time during options programming you can quit and the settings
that you have changed will be saved. Press the button to quit
the options menu or let the options programming time out by not pressing
any TELEPHONE KEYPAD buttons for 20 seconds.
A. Setting the Ringer Level
1. Press and hold the button to enter the menu.
2. Press the button to change the setting. “HI” will begin flashing.
3. Press the SCROLL UP or DOWN button to toggle between HI, LOW, and
OFF.
4. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
5. Continue with programming or press the button to return to
STANDBY mode.
B. Changing the Language
1. Press and hold the button to enter the menu.
2. Press the button to go to the LANGUAGE programming option.
3. Press the button to change the setting. “ENGLISH” will begin
flashing.
4. Press the SCROLL UP or DOWN button to toggle between ENGLISH,
ESPANOL, and FRANCAIS.
5. When the desired setting is displayed, press and hold the /re/pa button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the button to return to
STANDBY mode.
0oper 0
*
voice mail/menu
voice mail/menu
voice mail/menu
voice mail/menu
flash/edit
flash/edit
abc 2
save
save
voice mail/menu