Filter
Top Products
32
Remote control of News
With the PIN-code you will get access
to remote controlling your BeoTalk
1200.
While remote controlling it is possible
to:
1. Play News
2. Activate the answering machine
function
3. Record outgoing announcements
It is only necessary to store a message if
you still want it to play as a ”new
message”.
It is not necessary to delete News after
playing them. BeoTalk 1200
automatically deletes the oldest
messages when there is no memory left
for new ones.
Note!
If the answering machine function has
not been activated, up to one and a
half minute will pass before BeoTalk
1200 answers the call.
Access to remote control
Call BeoTalk 1200
Wait until BeoTalk 1200 starts
playing the announcement
(max. 1
1
/
2
minutes)
Press
Enter the PIN-code
If the access code has been entered
incorrectly or if BeoTalk 1200 will not
accept it, press and the access
code again
The announcement is interrupted
and dialling tone becomes audible.
Access signal for remote control
becomes audible
Playing News
Press 5 to play News
While playing…
Press 5 to play the next News
Press 8 to store the News being
played
Press 0 to delete the News being
played
Press to interrupt playing the
News
BeoTalk 1200 starts playing the News
list: Messages received and Internal
messages will be played, Voice
Announcements will be stated if the
names have been recorded in the
Phonebook. If you have not recorded
any name in the Phonebook or a -0
“name” (see page 25), you will hear
3 brief tones.
X
X