Filter
Top Products
Installation of BeoTalk 1200
Installation
BeoTalk 1200 can be either placed on
the table or mounted on the wall using
the enclosed bracket and screws.
BeoTalk 1200 should not be placed in
dusty or dirty environments, nor be
exposed to direct moisture.
Wall mounting
•
Mount the wall bracket using the
enclosed screws.
•
Lead the cord down through the slot
on the back of BeoTalk 1200.
•
Lead the cord behind the pin on the
wall bracket so that the cord is held
against the wall.
•
Place BeoTalk 1200 on the wall bracket.
Connection
•
Connect the cords as shown on the
drawing.
•
Insert the wall plug into your
telephone wall jack.
•
Insert the A/C adapter into the A/C
wall plug.
By using the enclosed adapter you are
able to connect both your telephone
and the BeoTalk 1200 to the same tele-
phone wall jack.
If you want to extend the cords, please
be aware that only the cord from LINE to
the telephone network can be extended.
Exchanging the other cords will affect
the functions of BeoTalk 1200.
In order for Caller ID to function, the
BeoTalk 1200 must be connected before
the switchboard, if any.
14