Filter
Top Products
26
GETTING STARTED
Axxess
®
Model 8600 Phone User Guide – Axxess IP Mode
USING THE MESSAGE BUTTON
In today’s busy world, it’s almost guaranteed that you will call someone that is on
another call, does not answer, or is in DND. But, with the button, you can let
the other person know you called.
When you leave a message, you can:
• Have the called party return your call. When the party you called responds to
the message indication, a call is automatically placed to your phone.
• Leave a message with the called party’s message center, (which can be a per-
son or voice mail). When the party you called responds to the message, a call is
automatically placed to his or her message center instead of your phone.
To indicate that a message is waiting, the button and the message indicator
lamp flash.
Leaving Messages
To leave a station message while on an intercom call: Press and hang up.
To leave a voice mail message while on an intercom call: Press
and wait for
the message center to answer.
To leave a silent message without placing an intercom call:
1. Dial .
2. Dial the desired extension number and hang up to leave a station message.
To cancel a message that you left at another phone:
1. Dial .
2. Dial the extension number of the phone where you left the message.
Retrieving Messages
To retrieve a message (Message button and lamp are flashing):
Lift the handset and press . A call is automatically placed to the phone or mes-
sage center that left the message. (See the following section for information about
entering your mailbox.)
To cancel a waiting message:
Press
.
MSG
MSG
MSG
MSG
3 6 7
3 6 6
MSG
3 6
8
Hawk.book Page 26 Wednesday, November 5, 2003 1:05 PM