Filter
Top Products
41
Making calls with ease
Routing calls
Diverting calls for another telephone*
Press the "Menu" function key.
Scroll to the Call routing menu item.
Confirm your selection.
Scroll to the Route for menu item.
Confirm your selection.
Enter the internal number of the subscriber for whom you want to set
up call routing to your own telephone, e.g. from 1234.
Accept the entry.
Enter the internal or external number of the subscriber to whom the
calls are to be routed, e.g. 4712. You must add an external line code (usually "0") in
front of an external number.
Scroll to the Immediately (after time, if busy) menu item.
Confirm your selection. The activated call routing will be displayed.
Exit menu.
Both subscribers involved see in the display the status display Call div. to
4712- or Call div. from 1234-. In addition, a clock symbol is shown for call
routing "after time" or a B for call routing "if busy".
i
Note
• When the call numbers are stored individually in the phone book then they are
automatically replaced by the corresponding user names.
• Instead of entering the call number you could also press the appropriate destina-
tion or partner key.
• If numbers for Managed Mobility Access (MMA) are set up for the subscribers,
they are shown when you enter the call divert destination. You can then select
these destinations directly.
• If a call divert has already been set up, it is displayed after the number of the inter-
nal subscriber is entered:
Change existing call divert: Select Edit, confirm by pressing OK and enter new
call divert. The old one is automatically deleted if it is not possible to have both call
diverts in parallel.
Delete existing call divert: select the call divert to be deleted, press OK to con-
firm and then delete by pressing OK.