Filter
Top Products
H323 IP Telephone Installation Page 80
15-601046 Issue 16a (15 March 2010)IP Office Release 6
8.3 Apache Web Server WML Configuration
Apache is an open-source web server that is available on many platforms. Basic familiarity with Unix is necessary to
configure it. The following is a step-by-step guide for configuring Apache Web-server:
1.
To set MIME types in Apache, a plain text file called httpd.conf is used.
2.
The location for this file varies depending on the individual setup, but the most usual path is /etc/httpd/conf/
httpd.conf. If the operating system is Windows, then look for a folder called conf under where Apache is installed.
3.
Using a text editor, open httpd.conf.
4.
Scroll down to the AddType section (usually at the bottom of the file) and add the following line: AddType text/
vnd.wap.wml wml
5.
Save the file.
8.4 Microsoft IIS Web Server WML Configuration
Microsoft Internet Information Server (IIS) is configured through the Internet Service Manager.
The following step-by-step guide can be used to set up MIME types necessary for WML:
1.
Select Start | Control Panel | Administrative Tools | Internet Services Manager.
2.
Right-click on Server and select Properties.
3.
In the Computer MIME Map section, click Edit.
4.
Click New Type and create a new file type using the parameters below:
· Associated extension: wml
· Content type: text/vnd.wap.wml
5.
Click OK.
6.
Stop and restart the web server so that the newly added MIME types are picked up.