Avaya 3626 Wireless Telephone, Desktop Charger, and Gang Charger
with CCMS
555-301-710 Page 23
Issue 2
The surface of the handset may be cleaned occasionally
with disinfectants used for general cleaning in a medical
environment. Isopropyl alcohol may be used occasionally
applied by a damp cloth or paper towel. When using
alcohol, do not rub the keypad characters vigorously.
Doing so will significantly degrade legibility.
• Do not use furniture polishes, waxes or plasticizer-
based cleaner (Armor All, etc.)
• Do not use lanolin, aloe, glycerin or other skin care
type products.
• Do not apply any solvent such as acetone, mineral
spirits etc.
• Do not directly spray or immerse the handset.
Should the headset connector become dirty, a scratchy or
intermittent signal may be experienced. To clean the
connector, dip the non-padded end of either a wooden or
paper handled cotton swab in isopropyl alcohol. Gently
insert in the connector and twist, repeating several times.
If available, blow compressed air into the connector to
clear debris.