Filter
Top Products
Avaya 3626 Wireless Telephone, Desktop Charger and Gang Charger
with CCMS
Page 18 555-301-710
Issue 1
Battery Packs
About Battery Packs
The Wireless Telephone will need to have its Battery Pack
recharged periodically. The Nickel Metal Hydride (NiMH)
rechargeable Wireless Telephone Battery Pack gives you
four hours of talk time or 80 hours of stand-by time. Stand-
by time is when the phone is turned on, but not in an active
call.
Indications of Low
Battery
The Wireless Telephone will notify you when the charge
on the Battery Pack is low by displaying the battery icon.
If you are in a call you will hear a soft beep through the
earpiece every six seconds. User has 15–30 minutes of
battery life left.
Not in call: The battery icon displays whenever the
Battery Pack charge is low. The message Low Battery and
a loud beep indicate a critically low Battery Pack charge.
These occur when the user is not in a call. The Wireless
Telephone will not work until the Battery Pack is charged.
Caution
Take care not to short the battery contacts on the Battery
Pack with metal objects such as coins, keys or paper clips.
Shorting the contacts can cause permanent damage.
Removing and Replacing the Battery Pack on the Wireless Telephone
Removing the Battery
Pack
To remove the Battery Pack press both battery release
buttons. The Battery Pack releases outward.
Replacing the Battery
Pack
To replace the Battery Pack, slide the Battery Pack straight
into the cavity. You should not have to force it against the
Wireless Telephone.
Changing the Battery
Pack while in a call
The Battery Pack may be changed while the call is still in
progress. Do not press
Power Off/End Call on the
Wireless Telephone. Perform the
Park Call function and
quickly remove the discharged Battery Pack and replace
with a charged Battery Pack, then press Power On/Start
Call
to turn the Wireless Telephone back on. The call
should then be retrieved from its Parked state to rejoin the
conversation. Check with the switch administrator for
instruction on how to perform this or a similar
process on your particular telephone system.