Filter
Top Products
8
Getting started
Battery charging
After installing the battery, charge the headset by placing it on
the headset charger as shown below. Before registration, the
headset ON/OFF light flashes twice every five seconds whether
the headset is charging or not. After registration, the headset
ON/OFF light is on when the headset is charging.
1. Insert the headset into
the charging cradle.
2. Push the headset downward
until the ON/OFF light on the
headset turns on.
Insert
Push
ON/OFF light
IMPORTANT INFORMATION
Use only the supplied rechargeable battery or replacement battery
(model BT191545). To obtain a replacement battery, visit our website at
www.telephones.att.com or call 1 (800) 222-3111.
In Canada, dial 1 (866) 288-4268.