Filter
Top Products
38
Telephone operation
Intercom
Models TL92�28/TL92�78 (three-handset
system)
1. Press MENU/SELECT when in idle mode to enter
the feature menu.
2. Use DIR / CID to scroll to
>INTERCOM, then press MENU/SELECT. The
screen will show INTERCOM TO:.
3. Enter the handset number 1-9 or, for handsets
10, 11 and 12, enter *0, *1 or *2, respectively.
The display will show CALLING HANDSET X,
with X being the handset number. The called
handset will ring, and its screen will show
HANDSET X IS CALLING.
4. On the ringing handset, press HOME/FLASH
or SPEAKER to answer the intercom call.
To end the intercom call:
• Press OFF/CLEAR on either handset.
-OR-
• Place either handset in the charger or
telephone base.
NOTES:
1. Before the intercom call
is answered, you can
cancel the intercom call
by pressing OFF/CLEAR
on the calling handset.
2. If the called handset
is not answered within
100 seconds, or if it is
in the directory or caller
ID history mode, or on a
call, or out of range, the
calling handset will show
the message UNABLE TO
CALL TRY AGAIN.
3. Pressing OFF/CLEAR
or DELETE/MUTE will
temporarily silence the
intercom ringer.
4. A maximum of four
handsets can be used
at a time. When two
handsets are being used
on an intercom call, the
other two handsets in the
system can be used for a
call on either the HOME or
CELLULAR line.