Filter
Top Products
Getting started
7
Step 2
Align the cover flat against the battery compartment, then slide it upwards until
it clicks into place.
Battery installation and charging
Step 3
Charge the handset by placing it
face forward in the telephone base
or charger. The CHARGE light on the
handset is on during charging.
IMPORTANT INFORMATION
1. Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
2. If you do not use the handset for a long time, disconnect and remove the battery to
prevent possible leakage.
After you install your telephone or power returns following a
power outage, the handset will prompt you to set the date and
time. For instructions, see Set date/time on page 12. To skip
setting the date and time, press OFF/CANCEL.
SET DATE
MM/DD/YY
SET TIME
HH:MM __
HD
A
U
D
IO
HD
A
U
D
IO
CHARGE light