AT&T CL4940 Telephone User Manual


 
36
Answering system
Number of rings
You can set the answering system to answer an incoming call after two, three,
four, five, six or seven rings. You can also select toll saver 2-4 or toll saver
4-6. If toll saver 2-4 is selected, the answering system answers a call after
two rings when you have new messages, or after four rings when there are
no new messages. If toll saver 4-6 is selected, the answering system answers
a call after four rings when you have new messages, and after six rings when
there are no new messages. The toll saver feature allows you to check for new
messages and avoid paying long distance charges when calling from out of
your local area. By default, the answering system answers an incoming call after
4 rings.
To set the number of rings:
When the telephone base is in idle mode, press
MENU/SELECT to enter the main menu.
Press MENU/SELECT again to select >Answering sys.
Press CIDq or DIRp to scroll to >
#
of rings, then
press MENU/SELECT.
Press CIDq or DIRp to choose >2, >3, >4, >5, >6, >7,
>TOLL SAVER 2-4 or >TOLL SAVER 4-6.
Press MENU/SELECT to save the setting. You hear
a confirmation tone and the screen returns to the
previous menu.
Call screening
Use this feature to choose whether incoming messages can be heard over
the speaker when they are being recorded. If you turn call screening on, you
hear the incoming message. While monitoring an incoming message, you can
answer the call by lifting the handset or pressing SPEAKER. By default, the
call screening is set to On.
To change the setting:
When the telephone is in idle mode, press
MENU/SELECT to enter the main menu.
Press MENU/SELECT again to select >Answering sys.
Press CIDq or DIRp to scroll to >Call screening,
then press MENU/SELECT.
Press CIDq or DIRp to choose >On or >Off.
Press MENU/SELECT to save the setting. The screen returns
to the previous menu.
NOTE: For more information on call screening, see page 39.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Answering system settings
Delete all old
># of rings
5
>4
Record memo
>Call screening
>On
Off