AT&T CL4940 Telephone User Manual


 
9
Getting started
Installation options
Push the two tabs at the bottom of the wall mount bracket as indicated and
remove the wall mount bracket from the telephone.
4.
Plug one end of the telephone line cord into the telephone line jack on the
bottom of the telephone base. Plug the other end into a telephone wall
jack or a DSL filter. Plug the small end of the power adapter into the power
jack on the bottom of the telephone base. Plug the large end into an
electrical outlet not controlled by a wall switch. Route both cords through
the slots.
5.
Adjust the screen angle for maximum visibility. 6.
DSL filter (not included)
is required if you
have DSL high-speed
Internet service.
Telephone wall jack
Electrical outlet
not controlled by
a wall switch
Route the power adapter cord
and the telephone line cord
through the slots.