Filter
Top Products
SET UP SYSTEM FEATURES
15
INSTALLATION
14
• Two Two-Line Jacks
Use the Navigation buttons to program or change the system features setup.
Convenience Ports
If you want to connect another device (such as a modem or fax machine) to
the wall jack, you can use the jacks on the phone labeled AUX. These
convenience ports use Lines 3 and 4; a call picked up on Line 3 or 4 at
another extension may interrupt a fax, modem, or message transmission.
• Press G to enter the Programming mode. The screen displays:
NOTE: If you do not press a key to continue programming within
20 seconds, the system automatically exits the Programming mode.
• Press - or + repeatedly to move through the list of options.
• Press > to choose the option currently displayed.
• Press S to store your selections and return to the ‘home screen’
for the feature currently displayed.
You can set up one feature at a time or you can set up a feature and then
move on to set up another feature. After you change one feature, press
+ or - to select another feature. When you are finished with features
setup, press E to exit Programming mode.
NOTE: After a feature is successfully programmed, the system beeps
once. If the system beeps twice, repeat the steps to set up the feature.
Store your
selection and
move to next
feature
Scroll through
options
Confirm
option choice
Exit Programming
mode
Used when
resetting
features to
default settings
Enter
Programming
mode
Feature
Options
Modular
Telephone Jack
Lines 3 and 4
Modular
Telephone Jack
Lines 1 and 2
Standard
Electrical
Outlet
Power Cord
Telephone Jack L1/L2
Telephone Jack L3/L4
Telephone Jack Aux L4
Telephone Jack Aux L3
• Four One-Line Jacks
Modular
Telephone
Jacks
Lines 3 and
4 with
Two-line
Adapter
Modular Telephone Jacks
Lines 1 and 2 with
Two-line Adapter
Standard
Electrical
Outlet
Power Cord
Telephone Jack L1/L2
Telephone Jack L3/L4
Telephone Jack Aux L4
Telephone Jack Aux L3