Filter
Top Products
Review Directory Entries
Press + or - to scroll through entries.
To change a directory entry, locate the entry, then press t
and use <, > and the dial key pad to edit the name. Press S
to save the name and move on to edit the number. Press S to
store the name and number.
Dial a Directory Number:
Locate the desired entry, then press o.
Remove a Directory Entry
Locate the entry and press X twice.
Remove All Directory Entries
Press X twice after entering Directory mode.
INTERCOM OPERATION (pages 39-43)
Make an Intercom Call
Press I and lift the handset
–OR–
press K or h. Dial the extension number you wish
to reach.
Answer an Intercom Call
Lift the handset
–OR–
press I, K or h when you hear the
double-ring.
Make a Single-phone Page
Press p and dial the extension you wish to reach.
Answer a Single-phone Page
Speak after the beep. (If the MUTE light is on, you must lift the
handset or press m first.)
Page All Phones
Press A or pt and speak toward the telephone.
Answer a System-wide Page
Press p when you hear the beep.
Make an Intercom Conference Call
Make or answer a call to the first party. Then press and release
I and dial the next party's extension. When this call is
answered, press and release C to begin the three way
conversation.
Temporary Tone Dialing
Dial the number. Press and release t. Buttons pressed after
this send touch tone signals.
Make a Conference Call
Place the first call on hold, then dial the third party. When this
call is answered, press C to begin the conference call.
Transfer a Call to Another System Phone
Press t, dial the extension where you're transferring the
call, then hang up.
SPEED DIAL OPERATION (pages 30-32)
Store Names/Numbers
Press D, S, then follow screen prompts. Use dial pad
keys to enter the name and number. Press > to move to the next
character and < to backspace. Press > twice to insert a space.
Press U to enter a three-second pause in the dialing sequence.
Press F to store a switchhook flash. Press the SPD button
where you wish to store the name or number.
Review Speed Dial Entries
Press a SPD button to see the entry displayed on screen. To
change the entry press t and use <, > and the dial keypad
to edit the name. Press S to save the name and move on to
edit the number. Press the SPD button where you wish to save
the entry.
Make a Speed Dial Call
Press the SPD button for the desired number. Press o to place
the call.
Remove a Speed Dial Entry
Press the SPD button of the number you wish to remove and
press X twice.
DIRECTORY OPERATION (pages 33-38)
Enter Directory Mode
Press D.
Store Names/Numbers
Press S, then follow the screen prompts. Use dial pad keys to
enter the name and number. Press > to move to the next
character and < to backspace. Press > twice to insert a space.
Press U to enter a three-second pause in the dialing
sequence. Press F to store a switchhook flash.