Filter
Top Products
CALLER ID OPERATION
Review Call History
Review information in the call history at any time.
1 Press < or >, or press U.
2 Select CALL-ID. The screen displays the
number of calls in the call history and
how many, if any, are new.
3 Use < or > to scroll through the call
history. The screen displays the name (if
your service provides this), number,
date, and time of the call simultaneously,
beginning with the most recent call.
4 When you reach the end of the call
history, the screen displays END OF
LIST. Press < or > to continue
reviewing the call history.
5 To exit the review, you can press either
softkey or wait 30 seconds.
Display Dial
NOTE: To use the Display Dial feature, you must follow the directions to
“Program Home and Local Area Codes” in the FEATURE SETUP section of
this manual.
Press on the handset as you review calls in call history. The
screen displays the number being called and the phone dials the number.
If the screen displays an error indicator (for example, Er), you cannot dial
any displayed digits.
If the call came from your home area code, then the screen displays only
the seven digits of the number you’re calling. When you press ,
the phone dials the seven displayed digits. You must program your home
area code for this to work.
If the call came from one of the local area codes you programmed, the
screen displays ten digits (three digits of area code plus seven digits of
phone number). When you press ,the phone dials ten digits,
without inserting a “1” before the area code.
40
CALLER ID
99 CALLS/25 NEW
TO SCROLL
MENU
CALL-ID DIR
3175550123
DOE JOHN
END OF LIST
9465 book_1ATT 2/29/00 11:24 PM Page 40