Filter
Top Products
HEADLINE RIGHT
HEADLINE R-SUB
37
ANSWERING SYSTEM OPERATION
AT CORDLESS HANDSET OR TOUCH TONE PHONE
ANSWERING SYSTEM
Voice Help Menu
Use the Voice Help Menu to access the answering system from your
cordless handset or from a remote touch tone telephone, even if you do
not know or remember the command codes.
1 Connect with the answering system.
2 Press 5. The system announces a list of operations and the
buttons you need to press.
3 At the end of the list, the system beeps twice to indicate it is ready
to accept a command.
4 You can access the Voice Help Menu any time after the system has
given you the two-beep signal that it is ready to accept a
command.
Audible Signals
Signal: Means:
Long ring Incoming call
Single beep Valid button press
Three-part tone Page
Repeating three-part tone Handset Locator
Two short beeps Handset is out of range
Four short beeps Low battery
Four long beeps Base is busy
Long buzzing tone Error – unsuccessful action
Series of ascending tones Action has been successful
“Chirp” after ring Priority Call
9465 book_1ATT 2/29/00 11:23 PM Page 37