Filter
Top Products
Store a Number in a One Touch Location
continued from page 51
Store a Pause in a One Touch Entry
You can include a pause while storing a dialing sequence
which requires a pause during actual dialing.
While you are entering the number to be stored, the
screen display includes PAUSE.
Press E where you want to store a pause. Each pause
counts as one digit. Continue storing the number as usual.
Store Temporary Touch Tone signals in a
One Touch Entry
If you have dial pulse (rotary) service, you can store a
dialing sequence which includes the touch tone signals
required for some special services.
While you are entering the number to be stored, the
screen display includes PAUSE.
When you want to begin storing temporary tone signals,
press - until the screen display includes TONE, then press
E. All numbers you enter after this will send touch
tone signals during dialing.
Store a Flash in a One Touch Entry
You can store the flash signal required by some special
services as part of a dialing sequence.
While you are entering the number to be stored, the
screen display includes PAUSE.
When you want to enter a flash signal, press - until
the screen display includes FLASH, then press E.
Continue storing the number as usual.
52
ONE TOUCH OPERATION
ONE TOUCH OPERATION
P
PP
PP
▼
▼▼
▼▼
945 CIB 2ATT 3/14/05 9:58 AM Page 52