Filter
Top Products
Select the Ringer Type
You can choose a ring pattern for incoming phone calls.
NOTE: Incoming intercom calls use Ringer Type 1
and cannot be changed.
1 Press E to begin feature setup.
2 Press - until the screen display includes
PHONE SETTINGS.
3 Press E. The screen display includes
EXTENSION NO.
4 Press - until the screen display includes
RINGER TYPE.
5 Press E. The screen display includes
L1 RINGER TYPE and the current setting.
6 Press < or > to change the ringer type
(Type 1 … Type 4) for the line shown.
7 When the desired setting for this line is shown,
press - to save your choice and move to the
next line with its ringer type.
8 Repeat Steps 6 and 7 to set ringer types
for other lines on this phone (L1 … L4).
9 When you are finished setting the ringer
type, press - until the screen display includes
DONE.
10 Press E. The screen display includes
RINGER TYPE.
11 Proceed to Step 4 on page 25 to set the
next feature (Delay Ring)
—OR—
Press and hold E to return to the idle
screen.
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
24
FEATURE SETUP
FEATURE SETUP
▼
▼▼
▼▼
❖
❖❖
❖❖
❙
❙❙
❙❙
❘
❘❘
❘❘
945 CIB 2ATT 3/14/05 9:58 AM Page 24