Filter
Top Products
Wall Installation
continued from page 15
• Two Two-Line Jacks (To use this illustration option you may
want to use the short line cord for Lines 1 and 2.)
7 Initialization.
If no battery is installed when you connect the power cord,
the phone runs a quick self-test and the screen displays
Initializing.. for about seven seconds.
NOTE: The phone will run through this same initialization any time it
is reconnected to AC power if a working battery is not installed (for
example, after a power failure or when the unit has been unplugged).
8 Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial
tone, turn to IN CASE OF DIFFICULTY beginning on page 66.
16
INSTALLATION
INSTALLATION
Modular
telephone jack
Lines 3 and 4
Modular
telephone jack
Lines 1 and 2
Standard
electrical
outlet
Power
adapter
945 CIB 2ATT 3/14/05 9:58 AM Page 16