Filter
Top Products
Wall Installation
For best results, follow the directions in “Battery Installation” beginning on
page 9 before installing the phone.
1 If the wedge is still attached to the underside of the base
unit, follow Step 1 in “Battery Installation” on page 9 to remove
the wedge.
2 Reverse the handset tab.
Hold down the switchhook, then pull out the handset tab and
rotate it 180 degrees. Push the handset tab down into the
grooves so it settles into position.
3 Connect the telephone line cords to the telephone as shown.
4 Connect the handset cord.
Plug one end of the coiled handset cord into the jack on the left
side of the phone. Plug the other end into the handset and hang up.
continued on page 14
13
INSTALLATION
INSTALLATION
Switchhook
Handset tab
L1/L2 jack
L3/L4 jack
945 CIB 2ATT 3/14/05 9:58 AM Page 13