Filter
Top Products
Issue 1 March 1996 31
To change a regular call into a priority call (when you hear a busy tone or a
ringback tone), do the following:
1. Do one of the following:
a. Press , and then press PCall.
b. Press .
■ You continue to hear ringback tone.
■ The ringing at the called extension changes to priority ringing.
Reset Speakerphone 0
You can adjust the speakerphone to the surrounding room acoustics to provide
optimal performance. Use the Reset Speakerphone feature for the following
reasons:
■ When you move your voice terminal to another location (even in the
same room).
■ Whenever the red light next to is fluttering.
NOTE:
You may also use this feature when you are on a call in the unlikely event
your speakerphone makes a squealing noise during the call. Your speak-
erphone will adjust itself to normal for that call (no tones will be heard). If
there has been an interruption in power (such as the system has just
been powered up, or you have connected the voice terminal at another
location), the light next to flutters until you reset the speaker-
phone.
To adjust the speakerphone, do the following:
1. While on-hook, press .
2. Press .
■ The speakerphone resets.
Menu
Priority
Speaker
Speaker
Shift
Speaker