Filter
Top Products
Issue 1 March 1996 19
The following special conditions apply when you use the keypad digits with the
Integrated Directory feature:
■ Use for a space and a comma.
■ Use for the letter Q.
■ Use for the letter Z.
Display, Softkeys, and Control Buttons 0
Entering Softkey Mode and Viewing the Three
Feature Option Screens 0
There are three separate feature option screens. Each of these screens allows
you to select from five different features for a total of 15 features. There are
more than 15 features available from the server; ask your system administrator
to give you the features you need most.
You can enter the Softkey Mode by pressing the display option button labeled
. The following is an example of a feature option screen:
The top line of each feature option screen shows you the status of each of the
features. An arrow appears above the feature name or abbreviation if the
feature is active. If there is no arrow above the feature, the feature is not active.
In the above example, the Automatic Callback feature is active.
The second line on each feature option screen shows the features you can
access. To use any of these features, you must press the softkey below the
feature name or abbreviation. For example, on the feature option screen shown
previously, you can leave a message for another extension to call you back by
pressing the softkey below LWC (the Leave Word Calling feature). If you want to
#
7
9
Menu
CFrwd LWC CnLWC TmDay PCall
v