Filter
Top Products
10 Issue 1 March 1996
To use the Automatic Callback feature, do the following:
1. After you hear a ringback tone or a busy tone, do one of the following:
a. Press , and then press AutCB.
b. Press .
■ You hear a confirmation tone.
2. Go on-hook.
■ When the called telephone becomes available again, your tele-
phone rings with priority ringing (a 3-burst ringback).
3. Go off-hook.
■ You hear a ringback tone and the call is placed to the number you
originally called.
If you decide that you want to cancel the Automatic Callback request, do one of
the following:
1. While on-hook, do one of the following:
a. Press , and then press AutCB.
b. Press .
2. Go off-hook and dial the Automatic Callback deactivation feature access
code _____.
Bridging 0
You may have a “bridged” call appearance for someone else’s voice terminal
assigned to your voice terminal. When you press this call appearance, it oper-
ates as if you were at that person’s voice terminal. You can use this bridged call
appearance to answer calls, make calls, or bridge on to an existing call.
Menu
Auto Callback
Menu
Auto Callback