Filter
Top Products
Transfer
To send present call to
1
Press [
Transfer
]
[dial tone]
another extension or
●
Present call put on hold and you are given a new call
outside number
appearance
Note: See your System
2
Dial extension or number to which the call is to be
Manager to determine
transferred
[ringback tone]
if you can transfer a
●
Remain on the line and announce call if desired; if no
call to an outside
number
answer or number dialed is busy, return to held call
by pressing its call appearance
3
Press [
Transfer ] again
●
Call is sent to dialed extension or number
4
Hang up or press [
Drop ]
Display Features
On/Off
The display is on when the telephone is on and off when the telephone is off.
Note: You may not have all of the Display Features listed below.
Normal Mode
In the normal mode, the display shows call information for the current active call
appearance:
●
You may have as many as 10 call appearances. Beginning with the first button in
the upper left corner of your faceplate and going down, the display identifies the
first 5 buttons as a through e; the 5 buttons in the second column are identified as f
through j. When the display shows [
a= ], it represents call information for the
first call appearance. The next button down would be shown as [
b= ], and so on,
continuing through [
j= ] if all 10 of these buttons are used for call appearances.
●
When you dial an extension, that number is shown and then replaced by the called
party’s name and extension.
33