Filter
Top Products
Intercom (Automatic/Dial)
To make a call to your
1
Press [
Icom Auto xxx
] (while off-hook)
[ringback tone]
predetermined
●
Intercom ring is sent
Automatic Intercom
partner
To dial a call to a
1
Press [
Icom Dial xxx
] (while off-hook)
[dial tone]
member of your Dial
Intercom group
2
Dial group member’s 1- or 2-digit code [ringback tone]
●
Intercom ring is sent
To answer any
1
Pick up handset or press [
Speaker Reset Speaker
]
intercom call
●
You are connected to call
Note: If you are active on another call, first press
[
Hold
], then press flashing [
Icom
].
Last Number Dialed
To automatically redial
1
Press [
Last Dialed
] (while off-hook)
the last number you
or dial Last Number Dialed code (while off-hook)
dialed (extension,
Note: This code is unique to your system and must be
outside number, or
trunk/feature code)
obtained from your System Manager.
●
Number is automatically dialed (up to 20 digits)
Note: Available with DEFINITY Generic 2 and System
85 R2V4 and some R2V3 systems. Check with your
System Manager to learn if the feature is available on
your system.
Limitations on this feature should be noted. Digits
dialed via Abbreviated Dialing, feature dial codes,
authorization codes, and Station Message Detail
Recording (SMDR) account codes are NOT retained in
memory and must be redialed for each call.
To see the number you
1
Press [
Last Dialed
] (while on-hook)
last dialed
●
Last number dialed is shown
21