Filter
Top Products
Self-Test
✔
To test lights, ringer,
and display of your
telephone
1
Press [ Select ] (while on-hook or off-hook)
●
Green light goes on
2
Press and hold [
Drop Test
]
●
Ringer sounds
●
All lights go on
●
Display is activated
3
Release [
Drop Test ] to end test
●
Ringer and lights return to pretest state. Green light
next to [
Select ] goes off.
Note: If ringer or lights do not respond during test,
notify your System Manager.
Send All Calls
To send all incoming
1
Press [
Send All Calls
] (while on-hook or off-hook)
calls (except priority,
or lift handset and dial Send All Calls code
intercom, and personal
[confirmation tone]
central office calls)
immediately to an
Note: You may hear a half ring as each call is sent to
assigned extension,
coverage if you have a DEFINITY Generic 2 or System
AUDIX, or message
85 R2V4.
center for coverage
Note: Check with your
System Manager to
determine how your
coverage path is set up
27