Filter
Top Products
Features
Putting a Call on Hold and Picking Up
a Waiting Call
1.
When you hear the Call Waiting tone, put the current
call on hold by pressing and releasing the
Recall
or
Flash
button or the switchhook.
2.
Dial
#87.
You are connected to the waiting call.
NOTE:
If you are using a rotary-dial telephone, hang up
instead of dialing the code. When the waiting call
rings, pick up the handset; you are now connected
to the waiting call and the original call is on hold.
When you have completed the waiting call, hang
up again; the call you had on hold will ring back
and you will have completed this procedure.
3.
When you have completed the waiting call, return to
the call on hold by pressing and releasing the
Recall
or
Flash
button or the switchhook again. Dial
#
✱✱
to
be connected immediately. You can also hang up the
phone; the phone rings and the held caller is on the
line.
NOTE:
If you put a call on hold to pick up a second call and you
hang up without returning to the call on hold, the held call
will ring back at your telephone.
Call Waiting
5-9