Filter
Top Products
Your Single-line Telephone
Buttons and Switchhook Flash
Your telephone may have a
Recall
button, which you press to
put a call on hold or to use a feature. If you have an 8102 or
8110 analog telephone, the
Hold
or
Flash
buttons can be
used to perform these functions.
NOTE:
Only the user of the 8100 series telephones can pick up a
call held with the
Hold
button. This button does not
access the system Hold feature.
If your telephone does not have a
Recall, Flash,
or
Hold
button, you can use a switchhook flash instead. For a
switchhook flash, press and quickly release the switchhook to
put a call on hold, to begin a transfer or conference call, or to
enter a feature code.
After pressing and releasing the
Recall
or
Flash
button or the
switch hook, you hear several breaks in dial tone (stutter dial
tone), indicating that you can use a feature or dial a number
to make a transfer or a conference call, For more information
on tones, see Chapter 2.
NOTE:
Some telephones disconnect, instead of sending a flash,
when you press and release the switch hook. See your
system manager for information on how you can access
features that require a switchhook flash.
Buttons and Switchhook Flash
1-11