Filter
Top Products
45
ANSWERING SYSTEM OPERATION
ANSWERING SYSTEM OPERATION
FEATURE SUMMARY
Default settings indicated by
*
.
SYSTEM ANNOUNCES: DESCRIPTION/DIRECTIONS:
“Change remote access code” Set the remote access code you
50* will use to access features and
functions of the answering system
from a touch tone phone.
“Change clock” Set the day and time. After you
Monday, 12:00 AM* set the day, repeat Steps 3 and 4 in
“Answering System Feature Setup” on
page 43 to set the hour and
minutes.
“Change message alert” When Message Alert is turned on,
Off
*
the base beeps once every 10
On seconds when new messages have
been received.
“Change announce only” When you turn Announce Only
Off
*
on, callers hear your
On announcement but cannot leave a
message.
“Change number of rings” Choose how many times the
2 phone will ring before the system
4
*
answers a call. With Toll Saver
6 active, the system answers after Toll
Saver two rings when you have new
messages and after four rings when
you have no new messages.
“Change call screening” When you turn Call Screening
On
*
off, you will not hear incoming
Off messages as the caller leaves them.
NOTE: Exit Feature Setup at any time by pressing a MAILBOX/STOP
button.