Filter
Top Products
41
Audible Indicators
This system gives you voice prompts for feature
operations and voice confirmations when you press
a button or complete an operation.
Turn Answering System On or Off
Press O to turn the system on or off.
The message window will show the number of
unreviewed messages at all times.
When the system is turned on, you will hear
“Machine on” and the ON/OFF light will be lit.
When the system is off, you will hear “Machine off”
and the O light will not be lit. The system will
still answer after 10 rings if it is off, then announce
“Please enter your remote access code” and wait for
you to enter the code to access remote functions. (See
REMOTE ACCESS beginning on page 50 for details.)
Set the Clock
This system comes preset to Monday,12:00 AM and
CL will flash in the message window. You will need
to set the correct day and time at the base.
1 With answering system on, press U until
the system announces,“Change clock.”
Press t to hear the current setting.
Press t again to announce the day.
2 Press g until the system announces the
correct day, then press t. The system
announces the current hour setting.
3 Press g until the system announces
the correct hour, press t. The system
announces the current minute setting.
4 Press g to advance the minutes one
at a time
— OR —
Press and hold g to advance 10 minutes
at a time. When the system announces the
correct minutes, press t. The system
announces the current clock setting.
5 Press a MAILBOX/STOP button to exit
programming.
❙
❙❙
❙❙
▼
▼▼
▼▼ ▼
▼▼
▼▼
▼
▼▼
▼▼
❖
❖❖
❖❖
❙
❙❙
❙❙
▼
▼▼
▼▼
ANSWERING SYSTEM OPERATION
ANSWERING SYSTEM OPERATION
ANSWERING SYSTEM OPERATION AT THE BASE