Filter
Top Products
IPF-2000 User Manual
26
8. Registration Message
Once the account is successfully registered on the IPF-2000, 【Ready for call】will shows on the
screen, so does the time and date. If the registration is not successful, the LCD will display
【Logon Fail】or【Wait Logon …】. The possible reasons of the registration failure would be:
• Internet connection is fail. (Fail to acquire the IP address under the DHCP and PPPoE
mode, or some IP configurations are wrong under the Static IP mode),
• Registration is fail. (Fail to register to the VoIP server)
9. Using IPF-2000
9.1 Pickup the Phone
When there is an incoming phone call, the IPF-2000 will ring. There are three ways you can
pick up the call:
• Use handset:
When the phone rings, pick up the handset to talk to the other end. When the call is
end, hand up the handset.
• From handset to speaker:
If you are using the handset, press ENTER to transfer the call to speaker. Press Enter
again to hand up the call.
• Use earphone:
Have your earphone plug into the earphone jack. When the phone rings, pick up the
handset and place it aside the phone, then you can use the earphone to pick the phone.
• Use speaker:
When the phone rings, press ENTER button to pick up the call. Press Enter again to
hand up the call.
• From speaker to handset:
If you are using the speaker, pick up the handset then you are able to pick up the call.
Press Enter again to hand up the call.
9.2 Making Phone Calls
• Use handset:
Pickup the phone, after hearing the ring tone, you can dial the number. Enter # right
after the number. Once you hear the “Du Du” tone from the phone, the phone on
another side is ringing.
• Use earphone:
Have your earphone plug into the earphone jack. Pick up the handset and place it
aside the phone, then you can use the earphone to pick the phone.