Filter
Top Products
IPF-2000 User Manual
30
• PIN: Enter the account password provided from you VoIP service provider.
• Register Port: Normally will be 1719.
• Signal Port: Normally will be 1720.
• Control Port: Normally will be 1722.
• RTP Port: Normally will be 1722.
• Local Type: Choose “account” if not specified by the VoIP service provider.
11.3 MGCP Web Configuration Example
With H.323 protocol used, please change the following parameters and leave the other setting
as default.
• Use Service: Check
• Service Type: Choose “common” if not specified by the VoIP service provider.
• Service Addr: Enter the IP address or domain name of the Gatekeeper of your VoIP
service provider.
• NAT Traversal: Choose “stun”.
• NAT Addr: Enter the IP address or domain name of the NAT server of your VoIP service
provider.
• Phone Number: Enter the phone number provided from your VoIP service provider.
• Account: Normally will be aaln/0 if not specified by the VoIP service provider.
• PIN: Enter the account password provided from you VoIP service provider.
• Register Port: Normally will be 2427.
• Signal Port: Normally will be 6800.
• Control Port: Normally will be 6800.
• RTP Port: Normally will be 6800.
• Local Type: Choose “phone number” if not specified by the VoIP service provider.
• Call Type: Normally will be advanced.