ArtDio IPF-2000 Telephone User Manual


 
IPF-2000 User Manual
5
1. Product Specification
Voice Interface
Call control protocol SIP(RFC-3261) or H.323 V4 or MGCP
Voice compression G.711 A/µ -Law, G.723.1, G.729A/B/AB
Echo cancellation G.165/G.167 16ms
Voice Process Differential input/Differential output
Delayed (End to End) < 100ms
Flow of the average 14K(G.723.1) ~ 51K(G.729) bps
Other Support
Silence Suppression, Voice Activity Detection, Comfort Noise
GeneratorAcoustic Echo Cancellation, Jitter Buffering, DTMF
tone detection, E.164 Dial plan
LAN Interface
Interfaces 10 Base-T Ethernet Ports
Connectors RJ-45 connector
Management Web browser, Keypad on the Phone, LCD screen,
IP address PPPoE, DHCP client, Static IP
Firmware Upgrade FTP/TFTP
Transport Protocol RTP/RTCP, UDP/TCP
General Information
100 ~ 240V AC, 50 ~ 60Hz
Power
5VDC, 1A
Power consumption 5W
Operation Temperature : 0 ~ 40 (32° ~ 104°F)
Storage Temperature : -30 ~ 65 (-22° ~ 149°F)
Working environment
Relative Humidity : 10 ~ 95% Non Condensing
Certification CE, FCC
Feature Keys
Called, Answered, Miss Call, Phone (Phone book/This Phone
Number), Network-Setting (IP/Subnet Mask/ Gateway/Server IP)
Speedy Dial, Call Hold, Redial, Mute, Volume Up/Down,
Hand-free.
100 Entries Phone Book
IVR (English)
Earphone/Microphone Connector
NAT Pass-through (SIP with STUN)
Other information
Call Hold, Call Mute, Call Status, Caller ID, Headset, Networking
Status, Volume Adjustment, No
A
nswer Call Forward, Busy Call
Forward, Always Call Forward, Miss Call, Dialed Call, Answered
Call, Last Number Redial, Speedy Dial, Web configuration, LCD
Display, LED indicators...etc.