IPF-2000 User Manual
14
3. Configure the volume of the phone handset and speaker.
【 audio settings】Æ Press ENTER several times Æ LCD shows 【handset in 】Æ
Press SPD/HOLD Æ Input the volume of the phone handset and speaker (Default is 7,
Max is 15) and then press ENTER.
5.4 Other Settings
1. Press # (Hold the “#” key) and then reboot IPF-2000 Æ LCD shows【password】Æ Press
1234 and then press ENTER Æ LCD shows【network settings】Æ Press VOL – several
times Æ LCD shows【other settings】.
2. Configure user password:
【other settings】Æ Press ENTER Æ LCD shows【password】Æ Press SPD/HOLD Æ
Input the new user password and then press ENTER.
3. Configure administrator password:
【other settings】Æ Press ENTER several timesÆ LCD shows【super password】Æ
Press SPD/HOLD Æ Input the new administrator password and then press ENTER.
5.5 Speed Dial Settings
1. Press # (Hold the “#” key) and then reboot IPF-2000 Æ LCD shows【password】Æ Press
1234 and then press ENTER Æ LCD shows【network settings】Æ Press VOL – several
times Æ LCD shows【speed dial settings】.
2. Configure speed dial code and phone number:
【speed dial settings】Æ Press ENTER Æ LCD shows【memory 1】Æ Press SPD/HOLD
and input first speed dial code (can be any number or character) Æ Press ENTER Æ LCD
shows【number 1】Æ Press SPD/HOLD and input first speed dial number (can only be any
number) and then press ENTER.
IPF-2000 has up to 100 entries speed dial numbers.
5.6 Default Settings
Press # (Hold the “#” key) and then reboot IPF-2000 Æ LCD shows 【password】Æ Press 1234
and then press ENTER Æ LCD shows【network settings】Æ Press VOL – several times Æ LCD
shows【default settings】and then press ENTER Æ LCD shows【Are You Sure?】.
• If choose Yes, LCD shows【Default ok】then shows【Undo default setting】. Press
REDIAL/MUTE several times until the LCD shows 【save settings】, then save the setting
and reboot the IPF-2000
• If choose No, IPF-2000 will not load the factory default settings.