Aiphone IP-EWST Intercom System User Manual


 
Using TalkMaster
6
TalkMaster can listen for incoming calls in one of three "modes":
Call Announcement with audible and visual alerts
In this mode, pressing the Intercom button notifies the TalkMaster operator by an audible
and/or visual alert. The TalkMaster operator responds and controls the microphone at that
intercom to enable user hands-free operation. To set up Call Announcement mode, check the
box next to Activate Call Announcement in the menu Admin - Preferences - Options tab
Automatic mode
In this mode, when an intercom user presses the button, their voice is used to notify the
TalkMaster operator of the incoming call. The TalkMaster operator can respond and control the
microphone to enable hands-free operation. To set up Automatic mode, select the Automatic
option under Listen Mode on the main screen.
Manual mode
In Manual mode, when an intercom user presses the button, their voice is used to notify the
TalkMaster operator of the incoming call. The TalkMaster operator can respond and optionally
allow the user to control the PTT button them selves. To set up Manual mode, select the
Manual option under Listen Mode on the main screen.
TalkMaster Main Screen
Before you can use your Aiphone IP Intercoms, they must be configured with IP address
information. Please see Configure Intercoms.