Filter
Top Products
Section 5 DLP-13 Total Access 600 Series System Manual
218 © 2004 ADTRAN, Inc. 61200624L1-1B
Saving the Total Access 6XX configuration
1. Establish a connection to the Total Access 6XX with the VT100 terminal software using the CRAFT
port or Telnet via the 10/100BASET Ethernet interface.
2. From the main menu, select S
YSTEM
U
TILITY
, then T
ERMINAL
M
ODE
; press <Enter>.
3. The following screen appears.
4. At the terminal prompt, type DOWNLOAD; press <Enter>. The following screen appears.
*
Perform the steps below in the order listed.
Do not enter further key commands until completing Step 5.