ADTRAN 624 Telephone User Manual


 
Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 117
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > RX ERRORS
Number of packets received in error and dropped.
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > CRCS
Number of packets detected with CRC errors.
L2 PROTOCOL (ALL–ETH–802.3]) > STATUS > RX COLLISIONS
Number of collisions which occurred during reception.
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > NON-ALIGNED
The N
ON
-A
LIGNED
parameter is set when the number of bits received is not divisible by 8.
L2 PROTOCOL (ALL–ETH–802.3) > STATUS > CLEAR COUNTS
Selecting this activator clears all the Ethernet stats.
B
RIDGE
Configure the bridge parameters and view bridging statistics from this menu as shown in Figure 9.
Figure 9. Bridge Menu
BRIDGE > CONFIG
Configure the interfaces and bridge table parameters from this menu.