Filter
Top Products
Section 5 DLP-12 Total Access 600 Series System Manual
216 © 2004 ADTRAN, Inc. 61200624L1-1B
1. Connect to the Total Access 6XX using the CRAFT (RJ-48) interface.
If you are not already connected to the unit’s rear CRAFT
interface, either with a VT100 compatible
terminal or with a PC running VT100 emulation software, follow the procedure in DLP-1, Connecting
a VT100 Terminal or PC to the CRAFT Port. Connecting to the rear
CRAFT
interface limits the
configuration transfer procedure to XMODEM only.
2. Log in to the unit using the read-write password (see DLP-2, Logging in to the System, for details).
3. Go to the S
YSTEM
U
TILITY
menu and select C
ONFIGURATION
T
RANSFER
menu; press <Enter>
4. Set the T
RANSFER
M
ETHOD
menu to X
MODEM
.
5. Select L
OAD
AND
U
SE
C
ONFIG
to start the transfer. Enter Y to confirm the transfer and prepare the
Total Access 6XX for the transfer download.
When the Total Access 6XX is ready to receive the XMODEM configuration file, the menu screen
clears and displays
A
WAITING
XMODEM U
PLOAD
....<CTRL+X>
TWICE
TO
C
ANCEL
. If this does not
appear, please review the preceding steps above for possible configuration errors.
6. From the terminal emulation software, begin the XMODEM transfer by using the appropriate command
sequence. For Windows HyperTerminal, select T
RANSFER
>S
END
F
ILE
. Enter the filename (including
path) and select XMODEM as the transfer method. Total Access 6XX configuration files should have a
.cfg extension.
If necessary, refer to the terminal emulation software documentation for help.
Because XMODEM data is being transferred inband through the menu interface, the VT100 menus of
the Total Access 6XX will be inoperable during this procedure from the
CRAFT interface. You can
cancel the update at any time within the terminal emulation software. (Please consult the
documentation provided by the terminal emulation software to determine how to do this.)
7. View C
URRENT
T
RANSFER
S
TATUS
to verify the progress of the current upload.
Perform the following steps in the order listed.