Filter
Top Products
Total Access 600 Series System Manual Section 2 Engineering Guidelines
61200624L1-1B © 2004 ADTRAN, Inc. 33
10/100BaseT Connection
The 10/100BASET port (RJ-48C) provides a 10/100BaseT Ethernet LAN connection for IP Routing, TFTP,
SNMP, and Telnet connections. Table 9 shows the 10/100BaseT pinout.
V.35 Connection
The Total Access 600 Series system provides a single V.35 Winchester-style connection on the rear of the
unit (as defined in Table 10).
Battery Backup Connection
An optional battery backup system is available for the Total Access 604/608 (P/N 1200641L1) and the Total
Access 612/616/624 (P/N 1175044L1, 1175044L2, or 1175044L4). For more details on the battery backup
system installation and operation, refer to the documentation available for your specific battery backup unit.
AC Power Connection
Each unit includes an auto ranging 90-250 VAC, 50/60 Hz power supply with a 3-prong removable cable.
Connect the power supply to a standard 120 VAC, 60 Hz electrical outlet for proper operation.
Table 9. Ethernet Pinout
PIN NAME DESCRIPTION
1
TX1 Transmit Positive
2 TX2 Transmit Negative
3 RX1 Receive Positive
4, 5 —––––– Unused
6 RX2 Receive Negative
7, 8 —––––– Unused
Table 10. V.35 Winchester Pinout
PIN/CCIT DESCRIPTION
PIN/CCIT DESCRIPTION
A/101 Protective ground (PG)
V/115 RX clock (RC-A) to DTE
B/102 Signal ground (SG)
X/115 RX clock (RC-B) to DTE
C/105 Request to send (RTS) from DTE
P/103 Transmitted data (TD-A) from DTE
D/106 Clear to send (CTS) to DTE
S/103 Transmitted data (TD-B) to DTE
E/107 Data set ready (DSR) to DTE
Y/114 TX clock (TC-A) to DTE
E/109 Data carrier detect
AA/114 TX clock (TC-B) to DTE
H/— Data terminal ready (DTR) from DTE
U/113 External TX clock (ETC-A) from DTE
J/— Ring indicator (RI)
W/113 External TX clock (ETC-B) from DTE
R/104 Received data (RD-A) to DTE
NN/— Test mode (TM) to DTE
T/104 Received data (RD-B) to DTE