Filter
Top Products
Section 5 DLP-15 Total Access 600 Series System Manual
224 © 2004 ADTRAN, Inc. 61200624L1-1B
1. Log in to the system with maximum rights (see DLP-2, Logging in to the System). Once you have
logged into the Total Access 6XX, go to S
YSTEM
C
ONFIG
/S
YSLOG
. Set the options as follows:
•
S
YSLOG
IP
: Enter the IP address of the PC where the Syslog host resides
•
S
YSLOG
F
ORMAT
: Specify the Syslog format as either ADTRAN (to work with ADTRAN Utilities)
or
UNIX (to work with a standard UNIX Syslog server)
•
S
YSLOG
F
ACILITY
: Specify the facility destination of log events; Options are
L
OCAL
0
to
L
OCAL
7
1. On your PC, go to S
TART
/P
ROGRAMS
/ADTRAN U
TILITIES
/S
YSLOG
. When the Syslog window opens,
you will see L
OCAL
0 through L
OCAL
7 listed on the left. This should correspond with the H
OST
F
ACILITY
specified in the Total Access 6XX. The Syslog program must be open on your PC in order for it to
record Total Access 6XX information. The Syslog files can be viewed through the Syslog window, and
they are also available under the ADTRAN Utilities Folder named L
OCAL
X.
TXT
, where X can equal 0
through 7. You can also view the L
OCAL
X.
TXT
file by clicking on E
DIT
L
OG
.
Setting up the Total Access 6XX to use Syslog:
Setting Up the Syslog Host: