Filter
Top Products
15
Actiontec VoSKY Call Center User Manual
To connect Call Center in Dual-Line mode:
1. Get the phone cable from the telephone and insert one end in
the “Phone” port on the rear panel of Call Center.
2. Connect the other end of the phone cable to the telephone.
3. Using the supplied phone cable, insert one end in the “Line”
port on the rear panel of Call Center.
4. Insert the other end of the supplied phone cable in a standard
phone line outlet. The components should be connected similarly
to the gure below:
Call Center is connected in Dual-Line mode. Next, go to chapter 4,
“Installing Call Center Software.”