Filter
Top Products
1. The
NEW
CALL
icon will appear on the display.
2. If you choose not to answer the call, after approximately 15
seconds after the last ring is received, the display will
change to Stand-By Screen mode.
3. The
NEW CALL
LED will flash, confirming new calls have
been received.
4. The Stand-By Screen will continue to be displayed until an-
other call is received or any button is pressed.
5. The display will indicate the total number of calls stored, as
well as the number of new calls that have not yet been re-
viewed.
6. If you choose to answer the call, press the
TALK
button.
The
IN USE/MUTE
LED will light.
7. The call duration timer will start five seconds after you have
answered the call. The elapsed time will be displayed for
the duration of the call.
8. Press the
TALK
button again to hang up after you finish
your call. Within 10 seconds, the display will return to
Stand-By Screen mode and the
IN USE/MUTE
LED will turn
off.
Using the Redial button
The
REDIAL
button is used to quickly redial the last number
(up to 32 digits) that was previously called.
1. Press the
TALK
button, after dial tone is heard in the head-
set, press the
REDIAL
button.
2. The number being called will appear on the display as it is
being dialed.
17