Filter
Top Products
5. The number being dialed will be appear in the display.
6. When called party answers, begin speaking normally into
the headset microphone.
7. After completing your call, push the
TALK
button to hang
up. The
IN USE/MUTE
LED will go out.
Receiving Calls
IMPORTANT: Allow at least two rings to occur prior to an-
swering calls. This assures that the AT-200HT will receive
the Caller-ID information correctly.
When a call is received, the display will indicate the caller’s phone
number and name, as well as the time and date of the call.
Figure 8
New Call LED
In Use/Mute
LED
New Call Icon
Repeat Call
Icon
16