Filter
Top Products
Operation
Setting the Tone/Pulse switch
The AT-200HT telephone can operate in tone or pulse dialing
mode.
1. Set the
PULSE/TONE
switch located on the side of the
telephone to the desired position. See Figure 6
2. If you're not sure which service you have, set the
PULSE/
TONE
switch to the
TONE
position. Press the
TALK
button
and dial your number.
3. If the dial tone continues, you have pulse dialing service,
set the
PULSE/TONE
switch to the
PULSE
position.
Figure 6
Setting the Ringer Off/Low/Hi switch
Set the
RINGER
OFF/LOW/HI
switch to the
HI
position for
normal ringer sound level. See Figure 7
Tone/Pulse Switch
14