Filter
Top Products
9112i IP Phone User Guide 35
Troubleshooting Solutions
1. Click on Operation->User
Password.
2. In the "Current Password" field,
enter the current user password.
Note: By default, the user name is
“user” (all lowercase) and the
password field is left blank. If
you have forgotten your pass-
word, contact your system
administrator for assistance.
3. In the "New Password" field,
enter the new user password.
4. In the "Password Confirm"
field, enter the new user pass-
word again.
5. Click to save your
changes.
For information on how to access
the Aastra Web UI, go to the sec-
tion "Accessing the Aastra Web
UI" on page 5.
Why does my phone display
"Bad Encrypted Config"?
The IP phone displays "Bad
Encrypted Config" because
encrypted configuration files are
enabled but the decryption process
has failed.
Report this error to your system
administrator.
How do I restart the IP phone?
1. Press the I button on
the phone to enter the Option
List.
2. Use the
V key to scroll down
the list of options to Phone Sta-
tus and press the
U key to
select.
3. Press the
V key to scroll to
the Restart Phone option.
4. Press the
U key to confirm and
restart the phone. If you do not
wish to restart your phone,
press the
T key to cancel.
Note: Your phone will be out of service
temporarily during the restart
and downloading process.
1. Click on Operation->Reset.
2. Click
.
3. Click OK at the confirmation
prompt.
Aastra Web UI
IP Phone UI
Aastra Web UI