Filter
Top Products
9112i IP Phone User Guide 31
Additional Features
Ring Tone Sets
In addition to ring tones, you can
configure ring tone sets on a
global-basis on the IP phone. Ring
tone sets consist of tones
customized for a specific country.
The ring tone sets you can
configure on the IP phones are:
• US (Default - also used in Canada)
• United Kingdom
•Italy
•Germany
•France
• Europe (generic tones)
• Australia
When you configure the country's
tone set, the country-specific tone
is heard on the phone for the
following:
- dial tone
- secondary dial tone
- ring tone
- busy tone
- congestion tones
- call waiting tone
- ring cadence pattern
You configure global ring tones
and tone sets using the Aastra Web
UI and the IP Phone UI.
Configuring Ring Tones and
Tone Sets
Use the following procedures to
configure ring tones and tone sets
on the IP phone.
1. Press I on the phone to
enter the Options List.
2. Select Tones.
3. Select Set Ring Tone.
4. Select the type of ring tone
(Tone 1 through Tone 5, or
Silent).
5. Select Set and then select Next.
6. Select Tone Set.
7. Select the country for which you
want to apply the tone set. Valid
values are Australia, Europe,
France, Germany, Italy, UK, and
US. Default is US.
8. Select Set.
The ring tone and tone set you
select is immediately applied to
the IP phone.
1. Click on Basic Settings->
Preferences->Ring Tones.
2. In the "Ring Tones" section,
select a country from the "Tone
Set" field.
3. Select a value from the "Global
Ring Tone" field
.
Note: See the Ring Tone Settings Table
on page 30 for valid values.
4. Click to save your set-
tings. These changes are not
dynamic. You must restart your
IP phone for the changes to take
affect.
5. Click on Operation->Reset.
6. In the "Restart Phone" field
click to restart the IP
phone and apply the ring tone.
IP Phone UI
Aastra Web UI