Filter
Top Products
Model 480i Broadsoft Admin Guide
4
Methods of Installation
SIP Settings:
If you have a proxy server or have
a SIP registrar present at a different
location than the PBX server, the
following settings may need to be
changed:
1. Proxy IP
This is the IP address of the
proxy server.
2. Proxy Port
This is the SIP proxy server’s port
number. By default this number
is set to 5060.
3. Registrar IP
This is the IP address of the
SIP registrar.
4. Registrar Port
SIP registrar’s port number.
By default this is set to 5060.
5. User Name
This is used in the name Þeld of
the SIP URI for the 480i phone
and for registering the 480i at the
registrar.
6. Display Name
This is used in the display name
Þeld of the From SIP header Þeld.
Some IP PBX systems use this as
the caller’s ID and some may
overwrite this with the string that
is set at the PBX system.
7. Auth Name
The authorization name that will
be used in the username Þeld of
the Authorization header Þeld of
the SIP REGISTER request.
8. Password
The password that is used to
register at the registrar.
Phone Status:
The following options display
the phone’s status or allow you to
power cycle the phone or reset the
phone to its factory default settings.
1. Network Status
This shows the network status
of the two Ethernet ports at
the back of the phone. You can
also view the phone’s IP and
MAC addresses.
• IP Addr
Shows the IP address of
the phone
• MAC Addr
The MAC or the
hardware address of the
480i’s Ethernet card
2. Firmware Version
This option displays information
about the Þrmware that is
currently installed on the 480i.
3. Reset Phone
This option lets you reboot the
phone. A reset may be necessary
when:
• There is a change in your
network, OR
• To re-load the conÞguration
information modiÞed through
the conÞguration Þles to the
phone, OR
• If the settings for the 480i on
the IP PBX system had been
modiÞed.
4. Factory Default
This option lets you reset the
phone back to the factory default
settings, including the network
settings. Performing this
operation will result in losing
all user modiÞed settings.
Note: For information on other settings
in the options list of the phone,
please refer to the Aastra 480i
Installation Guide provided with
the 480i.