Filter
Top Products
Model 480i Broadsoft Admin Guide 36
Appendix A: Sample Configuration Files
#----------------------------------------------------------------------
# Softkey Settings
# ================
# Softkeys can be set either server wide or unique to each phone.
# Setting softkeys as line/call appearances should be done in the
# "<mac>.cfg" Þle, since these are unique to each phone.
# Notes: There are a maximum of 18 softkeys that can be conÞgured
# on the 480i phone. These can be set up through either of the 2
# conÞguration Þles, depending on whether this is to be server
# wide ("aastra.cfg") or phone speciÞc ("[mac].cfg").
# Each softkey needs to be numbered from 1 - 18, for example
# "softkey12 type: speeddial". Softkeys can be set up as speeddials
# or as additional call/line appearances and have a type, label
# and value associated with it as seen here in the default softkey
# settings.
# SOFTKEY TYPES: "line", "speeddial"
# SOFTKEY LABEL: Alpha numeric name for the softkey. The maximum
# number of characters for this value is 10 for
# speeddials and 9 for lines.
# SOFTKEY VALUE: If softkey type is a speeddial, any DTMFs (from
# 0 - 9, *, "#") or a comma (,) for 500ms pause and
# 'E' for On-hook can be set for the value. If
# softkey type is line, enter value as a number from
# 5 up to 9 (1 - 4 are already hardcoded as the L1,
# L2, L3 and L4 hard key line/call appearances)
# Softkey Speed Dials
# ===================
# For the default softkey speed dials, please refer to the sample
# "aastra.cfg" Þle.
Continued...