Filter
Top Products
3
Model 480i Broadsoft Admin Guide
Methods of Installation
The 480i’s Options List
1.
Press the
£
button on the
phone to enter the options list
2.
Use the
r
and
s
to scroll
through the list of options
3.
Press the
Show
softkey, the
4
button or press the number
corresponding to the option
to select an option
4.
Use the softkeys to change a
selected option
5.
Press the
Done
softkey at any
time to save the change and exit
the current option
6.
Press the
Cancel
softkey, the
3
button or the
k
button at
any time to exit without saving
the changes
Administrator Level Options
Some options in the phone’s options
list are considered administrator
level options and require the
administrator user name and
password. When attempting to
access administrator level options,
the phone will prompt for the
administrator password before
allowing access. The default
password for the administrator is
"
22222
". For all other phone options,
please refer to the
Aastra 480i
Installation Guide
.
The administrator level options in
the phone’s Options List are:
•"
8.Network
"
•"
9.SIP Settings
"
•"
4.Factory Default
" found
under option "
10.Phone Status
"
Network:
If DHCP is enabled, all the Network
settings are automatically
conÞgured. The 480i’s Þrmware
allows the network settings to be
manually entered, if for any reason
the phone cannot populate any of
the settings with DHCP enabled.
If DHCP is disabled the following
network settings can be conÞgured
manually:
1. DHCP
This turns DHCP on or off. IP
Address, Subnet Mask and
Gateway options are automatically
populated and are read-only
when DHCP is used. DHCP is
used by default.
2. IP Address
This is the phone’s IP address.
To assign a static IP address to the
phone, disable DHCP.
3. Subnet Mask
To assign your own subnet mask
to the phone, disable DHCP.
4. Gateway
To assign your own gateway
IP address, disable DHCP.
5. DNS
To assign your own DNS
addresses, disable DHCP.
6. TFTP Server
This is the TFTP server’s IP
address.